Sell VPS on Proxmox VE from WHMCS
Proxmox VPS Suite for WHMCS
- Version 1.0.5
- WHMCS 8.13 – 9.0
- PHP 8.1 – 8.3
- Updated Nov 22, 2026
When the customer pays, WHMCS creates their VPS on Proxmox VE with the plan's resources, assigns an IP and powers it on. The customer manages it from their client area, and you control servers, nodes, IP ranges and templates from one panel.
- KVM and LXC containers
- IPv4 and IPv6
- Console in the browser
Server module and admin panel for WHMCS 8.x and 9.x · In English and Spanish
What it solves
Turn your Proxmox VE into a product that sells and supports itself, with no tickets for everyday tasks.
- The VPS is created on payment
- Create, suspend for non-payment, unsuspend, change plan and terminate all run through the standard WHMCS functions. On a plan change, cores, memory and disk go up; disk can only grow.
- Customers serve themselves
- They power their VPS on, off and restart it, open the console in the browser, reinstall the operating system, and manage their snapshots, backups, firewall and SSH keys.
- Each VPS on the right node
- It picks the node with the most free memory, weighted by the weight you give each node. With a weight of 0, a node is left out of new orders.
- Your network, protected
- Each VPS can only use its own IP and MAC addresses, and the customer cannot remove that protection. The console works without exposing Proxmox's management port to the internet.
Everything it includes
For your customer
- VPS status, IPv4 and IPv6, cores, memory, disk and bandwidth
- CPU, memory, disk and network charts by hour, day, week, month or year
- Console in the browser, nothing to install
- Operating system reinstall, on KVM and on LXC
- Snapshots with a per-customer limit (5 by default) and rollback
- Backups with a per-customer limit (3 by default); restoring is handled by your team
- Per-VPS firewall: inbound rules by port and by IP or network
- SSH keys installed when the VPS is created or reinstalled
For you
- Proxmox servers connected with an API token
- Nodes and templates that sync automatically
- IPv4 and IPv6 ranges, with free and assigned addresses
- Safe IP assignment even when two customers buy at the same time
- VPS inventory with customer, node, status and IP
- A suspended service is read-only: the customer cannot power it back on
- Alerts by Telegram or WhatsApp: node down, high resource usage or a VPS that stops on its own
Panel sections inside WHMCS
- Dashboard
- Servers
- Nodes
- IP Pools
- Templates
- VMs
- Settings
- Notifications
- Logs
- Info
Getting started
-
Connect your Proxmox
Register your server with an API token. The module pulls in nodes and templates; you define your IP ranges.
-
Create your plans
In each WHMCS product you set the VPS type (KVM or LXC) and its resources.
-
The customer buys and manages
On payment, the VPS is created, gets its IP and powers on. The customer manages it from their client area.
Plans and pricing
The same module on all three plans: what changes is how you pay and how you receive the code. Prices in Mexican pesos (MXN), plus tax.
Monthly
$300 MXN per month
- Every feature of the module
- Updates and support while the license is active
- Renews every month
- Installation: $500 MXN, charged once
Best value
Annual
$3,000 MXN per year
- Pay for 10 months, use 12: you save $600 MXN a year
- Installation included
- Every feature of the module
- Updates and support while the license is active
Open source
$9,000 MXN, one-time payment
- Readable source code, not encoded
- You can adapt it to your own operation
- One payment, no renewals
- Installation included
Our team does the installation on your WHMCS: we upload the module, activate it and configure it with you. I have a question before buying
Proxmox VPS Suite changelog
Current version: 1.0.5. Last updated: Nov 22, 2026.
-
v1.0.5
- Fixed: A power action that Proxmox rejects is no longer announced as successful.
- Improved: When communication with Proxmox fails, the customer sees a readable message instead of the original technical text; power buttons lock against double clicks and reinstalls show their progress.
- Improved: IP pools are strictly validated (CIDR range) and errors are shown on screen safely.
- Improved: 14 settings that did nothing were removed, the machine list shows whether each one is KVM or LXC with the right link, and the activity log is translated.
- Improved: The whole admin panel and the manuals are in Spanish, with a one-setting-per-row Settings screen, and the manual no longer suggests creating a token with full administrator privileges.
-
v1.0.5
- Fixed: Reinstalls started from the admin panel always failed because they did not wait for the machine to shut down before deleting it.
- Fixed: The customer's reinstall rejects templates that belong to another server or node.
- Improved: The console limits how many sessions a single service can open, and failures that prevented connecting in some cases were fixed.
- Fixed: If the module cannot read the firewall options, it no longer switches off the IP and MAC spoofing protection by mistake.
-
v1.0.4
- New: The browser console works without the customer having a Proxmox session: it opens with a one-time session that expires in 60 seconds, and the noVNC viewer is included.
- New: Base protection against IP and MAC spoofing on every machine, which the customer cannot remove; their firewall switch only controls their own inbound rules.
- New: A setting for DNS servers on machines in networks without DHCP.
- Fixed: The customer's firewall rules did nothing because machines were created with the network card's firewall off.
- Fixed: Reinstalling lost the IPv6 address, the admin could pick up the gateway of the wrong pool, and a storage that did not exist was used.
See the full history (9 more entries)
-
v1.0.3
- Security: WHMCS no longer needs a token with full control of the Proxmox server; a token limited to a group (pool) of machines is now enough.
- New: Each server has a pool setting, and every new, cloned or reinstalled machine is created inside it.
- Improved: Proxmox SSL certificate verification is on by default.
-
v1.0.2
- Fixed: A failed task is now marked as failed; before, it stayed pending forever and was checked against Proxmox every 5 minutes, and in some cases it halted the whole periodic review.
- Improved: A leftover migration tool that was no longer used was removed; if run, it could have assigned the same IP to two customers.
-
v1.0.1
- Fixed: The detail page of each IP pool and the node charts were broken; the first showed the raw template code and the other failed when querying the data.
- Fixed: Node-down, connection-failed and machine-stopped alerts sent over WhatsApp reached no one; they now go out through whichever provider you have configured, using Meta-approved templates.
- Fixed: An error message from a node containing invalid characters could stop the entire periodic review, not just the affected task.
-
v1.0.0
- Improved: A VPS purchase was tested end to end (order, invoice, payment and automatic creation), and the machine is ready in about 15 seconds.
- Fixed: The public IPv6 address now shows in the customer panel, on the service page and in the welcome email; before, customers had no way to know how to reach their server.
- Fixed: When a service is terminated, both its addresses, the IPv4 and the IPv6, are released.
-
v1.0.0
- Fixed: Reinstalling from an ISO destroyed the machine because the initial configuration disk was lost, and the machine was created without credentials or network.
- Fixed: The VPS "Change password" button led to the portal password instead of the server's; password changes now also respect the service status.
- Fixed: The node charts had been blank since the site's security policy was tightened; the library now ships inside the module.
- Fixed: Error messages in the client area appeared in English even though the translation already existed.
- Fixed: Power actions in the client area now always respect the service status: a suspended VPS offers none.
-
v1.0.0
- Fixed: Three chained failures prevented creating a VPS: IP assignment used up the address without handing it out, the module never reported success to WHMCS and left the service Pending, and the disk was not enlarged to the purchased size.
- New: Dual-stack networking, with a private IPv4 and a public IPv6, which turns on by itself if the server has a pool of IPv6 addresses.
- Fixed: Node memory was stored as a negative value, which distorted the occupancy percentages and the choice of node for each new machine.
- Improved: The client area pages ship their own styles and work with any WHMCS theme.
-
v1.0.0
- New: Customers can create, restore and delete snapshots (up to 5 per service) and backups from their panel.
- New: Customer firewall with inbound rules (up to 10) and SSH keys that are injected when the machine is created or reinstalled.
- New: CPU, memory, disk and network charts for the customer, and per-node charts for the administrator.
- New: Per-node weight for automatic allocation (at 0 the node is left out) and a detailed view of each IP pool, with options to release or reserve addresses.
- New: Admin alert when a node exceeds the CPU, memory or disk threshold (90% by default, configurable).
-
v1.0.0
- Security: The limit on power actions is now applied per customer and service.
- Security: The panel's sync and connection-test actions require protection against unauthorized requests, and SSL certificate verification is on by default.
- Fixed: The customer's start, stop and restart buttons failed silently because a security value was not being sent.
- Improved: Deactivating the module no longer deletes your servers or the machine inventory; to uninstall and remove the data you must confirm by typing a word.
- Improved: The admin pages show a navigation path and the customer pages have a more polished design.
-
v1.0.0
- First release: creates KVM virtual machines and LXC containers from WHMCS, and suspends, reactivates, terminates and changes the plan or password automatically.
- Includes connection to Proxmox with an API token, automatic node selection, IP address pools, template sync and a noVNC console.
- Includes a customer panel with a service overview and an admin panel with a node dashboard, machine lists and settings, plus a widget with CPU and memory bars and the machine count.
Frequently asked questions
Does it work with both KVM and LXC?
Yes. Each product defines whether it creates a KVM machine or an LXC container, and reinstall works on both.
Do I have to open the Proxmox port to the internet for the console?
No. The console can go through your WHMCS server with single-use sessions, so Proxmox's management port stays closed to the public.
What can a customer do while their service is suspended?
View the status and open the console. They cannot power their VPS on until the service is reactivated.
Can the customer restore a backup on their own?
Not today: they can create and delete their backups, and your team does the restore. Snapshots they can roll back themselves.
Another question? Write to us and we will reply in English or Spanish.
Sell VPS that deliver themselves
The VPS is created on payment, the customer manages it on their own, and you see your servers, nodes and IPs in one panel.